| Quality features you'll find in every Covercraft mask: |
| Protective air intake screens are an integral part of the mask, not separate, and they are sewn into the outside of the mask so there are no loose pieces of material inside to abrade the paint surface. |
| Covered aluminum tabs allow adjustment at the fender wells as vinyl expands and contracts due to temperature. Take a look at a non-adjustable mask being driven down the road and you'll see why this is an important feature. |
| Reinforced air foils prevent flapping and lift. Very few patterns don't require this feature; there is just too much air whipping around the front of your vehicle as it goes down the road, like cross-winds and back drafts from passing semi trucks |
| We use a micro-perforated finish on our vinyl. It allows the mask to "breathe" and permits moisture vapor to evaporate when the vehicle is driven in wet weather. Still, if a mask becomes wet and is going to be left sitting in the sun, we recommend it be removed to allow the backing to dry properly. |
| Our heavy-gauge leather grain vinyl has a soft, protective backing. We use white non-woven fleece so you can easily see when it's time to clean the back-side of the mask. |
| Seams are overlapped and finished with a strong, durable top stitch. Edges are covered with soft, non-abrasive felt-rimmed bindings. |
| |
| Features: |
| Get all-over protection for your front end with the Covercraft Full Mask |
| The Full Mask is custom-designed to cover all the way from your bumper to the leading edge of your hood on your year, make and model |
| Traditional 1-piece car bra installs and comes off quickly, while the 2-piece lets you open and close the hood naturally |
| Covercraft constructs your Full Mask from heavy-duty black vinyl, which has an attractive leather grain texture |
| Non-woven, downy fleece liner guards against scratches while it pampers your paintjob |
| Micro-perforation lets the Full Mask breathe, so it dries out while you drive around, even in wet weather |
| Protective air intake screens are woven into the Full Mask, so they won't rub against your finish |
| Covered aluminum tabs let you make minor size adjustments when the weather changes |
| Uses woven nylon straps, molded plastic hooks, felt-covered metal wheel well hooks and adhesive velcro for attachment |
| Reinforced air foils keep your Covercraft Full Mask from flapping in the wind like lesser auto bras |
| Cleaning is a breeze - just wash it off with a hose, let it dry and put it back on |
| Includes a 3-month warranty |
| |
| Description |
| Because the nose of your vehicle bears a lot of abuse, it deserves the maximum protection that the Covercraft Full Mask delivers. From the base of your bumper to the leading edge of your hood, this front end mask shields your finish from dings, gouges and other paintjob-marring damages that cost you dearly at the body shop. |
| Your Covercraft Full Mask is custom designed to fit like a second skin on your exact year, make and model. When the weather changes, the covered aluminum tabs let you fine-tune the tension. |
| Covercraft crafts their Full Mask from heavy-gauge black vinyl, which is micro-perforated to allow drying while you're driving. To protect your paint from scratches, the inner layer is a soft, non-woven fleece. |
| The Full Mask comes in two styles. The 1-piece installs in no time, and comes off just as easily when you need to pop the hood. The 2-piece design takes more time to go on, but the hood opens normally. And, both include a 3-month warranty. |
| The Covercraft Full Mask does not cover the bumper on certain truck models because it would prevent you from mounting lights, grille guards and other truck accessories. |
| The Covercraft Full Mask will in most cases have a spot for the front license plate to be visible. Check vehicle description for any additional details. |
